BOOK VIDEO-CALL
cover-wheel
Logo
SiiGMATIC INDEPENDENT TESTING SERVICES

SiiGMATIC by CiiLOCK is a NATA accredited Independent testing service provider.

We offer a diverse range of testing services to improve and maximise the performance of the product. Our primary mission is to provide you with a better and compliant product experience.

Now Offering AS2047 Testing and WERS ratings

AS2047 testing and WERS ratings are crucial for any fabricator or builder looking to provide high-quality windows and doors to their customers. AS2047 is the Australian standard for windows and external glazed doors, ensuring that products meet certain performance requirements such as air infiltration, water penetration resistance, and structural integrity.

Additionally, WERs (Window Energy Ratings) provide a rating system that helps customers understand how energy-efficient a window or door is, based on factors such as heat gain, heat loss, and air leakage. This can help customers save money on their energy bills and reduce their environmental impact.

By ensuring that your products meet AS2047 standards and have high WERs ratings, you can offer your customers peace of mind that they are getting quality products that are both durable and energy-efficient. This can lead to higher customer satisfaction and repeat business, as well as a strong reputation in the industry. Don't overlook the importance of AS2047 testing and WERs ratings, and get your systems tested at SiiGMATIC!

Our Accreditations

Logo Logo
Our SERVICES
✖
as2047

✙ AS2047
Windows In Buildings

AS2047 Windows In Buildings

SIIGMATIC’s weather performance test rig is designed to test windows and doors to the requirements of Australian Standard AS2047 - Windows and external glazed doors in buildings. AS2047 is the mandatory minimum specification for windows and doors used in Australia.

To verify product performance claims and its conformance to AS2047, the following five tests are required.
SIIGMATIC provides facilities to conduct the following tests required for AS2047 conformance:
  • Deflection Test – AS4420.1 Clause 2,3: This standard addresses the deflection/span ratio of the window test sample under wind load. The deflection ratio is measured in both positive and negative load at the desired design pressure for the window under test.
  • Operating Force Test – AS4420.1 Clause 2,4: This standard addresses the operating force for sliding sashes of the window test sample. The force to open and close a window either horizontally or vertically is measured and recorded in both directions.
  • Air Infiltration Test – AS4420.1 Clause 2,5: This standard addresses the resistance of the window test sample to air infiltration. Air flow is measured and recorded at low pressures indicating the amount of air leakage emanating from the product under test.
  • Water Penetration Test – AS4420.1 Clause 2,6: This standard addresses the resistance of the window test sample to water penetration (under static wind load). Water is sprayed onto the product under test at a controlled rate and static pressure is applied for fifteen minutes at the desired design capability of the product.
  • Ultimate Strength Test – AS4420.1 Clause 2,7: This standard addresses the ultimate load capacity of the window test sample. A pressure is applied to a product that represents a peak load at which the product needs not fail after 10 seconds in both positive and negative.
The test rigs can accommodate specimens up of 3 meters in height and 4 meters in width. On completion of your testing SIIGMATIC can issue with a NATA endorsed testing certificate.

window

✙ WERS Ratings

WERS Ratings

Logo

As a window and door manufacturer or importer, you may have heard of the Window Energy Rating Scheme (WERS) but may not be entirely sure what it is. In essence, WERS ratings measure the energy efficiency of windows and doors on a scale of zero to ten stars, with ten stars being the most efficient. The ratings are based on factors such as thermal performance, air infiltration rate, and solar heat gain coefficient.

Obtaining WERS ratings for your windows and doors can provide your customers with valuable information about the energy efficiency of your products, helping them make informed decisions for their homes or businesses. Additionally, as consumers become more environmentally conscious, WERS ratings can be a powerful marketing tool, setting your products apart from the competition and attracting environmentally-conscious customers.



as4145

✙ AS4145
Locksets Testing

AS4145 Locksets Testing

SIIGMATIC’s purpose built, flexible, calibrated test rigs are NATA accredited to test the durability of mechanism of your products in accordance with AS4145.2 App.B, i.e Durability of mechanism of Locksets for windows and doors.

Testing in accordance with AS4145 ensures that you can be confident about the durability performance and design level of your product. Understanding your products cyclic life and ease of operation gives you certainty and confidence about promoting your product to the market.


icp002

✙ ICP 002 Window & Door
Hardware Testing

ICP 002 Window & Door Hardware Testing

SIIGMATIC can test window and door hardware including but not limited to roller, hinges, soft door closing mechanism in accordance with the requirements set out in TT-ICP-002 section 3.3.

This industrial code of practice provides customers and consumers a guide of selecting hardware, by their ease of operation, and durability performance as part of a complete window or door system. The outcomes of this test evaluate whether the hardware is fit for its designated purpose, being an integral member in the window and door systems. Understanding your products cyclic life and ease of operation gives you certainty about promoting your product to the market.
SIIGMATIC provides facilities to conduct the following tests required for TT-ICP002 conformance:
  • Durability Test
  • Ease of operation Test
On completion of your testing SIIGMATIC can issue with a NATA endorsed testing certificate.

sliding

✙ Sliding Door System In
Accordance With BS EN 1527

Sliding Door System In Accordance With BS EN 1527

SIIGMATIC offers testing sliding door in accordance with the requirements set out in BS EN 1527 Clause 4.3, 4.4 and 4.10. This British standard provides customers and consumers a guide of selecting sliding door system by their static load performance, durability performance and initial friction.
On completion of your testing SIIGMATIC provides a test report and the conclusion of the test.

salt-spray

✙ Corrosion Testing

Corrosion Testing

Corrosion Testing determines the resistance of materials to corrosion under certain environmental conditions, including temperature, humidity, and salty fog.

SIIGMATIC’s purpose built natural salt spray cabinet with size of 450×600×400 (D*W*H) mm, in-built inert non-metallic specimen support, atomizing equipment with PID control of temperature and humidity, is manufactured to comply with clause 4 in AS 2331.3.1 (Methods of test for metallic and related coatings - Corrosion and related property tests - Neutral salt spray (NSS) test).
On completion of your testing SIIGMATIC provides a test report and the conclusion of the test.

impact

✙ Strength & Impact Testing

Strength & Impact Testing

SIIGMATIC offers general testing to evaluate the static load limit as well as impact strength, dynamic of various products. Test procedure can be following Australian standards (eg. AS 5039) or variant of Australian or international standards, in-house development testing method, or customer specified test procedures. Please provide a description of your test requirement.
On completion of your testing SIIGMATIC provides a test report and the conclusion of the test.

hypothesis

✙ Hypothesis-Based
Testing & Video Footage

Hypothesis-Based Testing & Video Footage

SIIGMATIC have a strong technical team had a great experience to perform customer specified testing or propose non-standard or even think-out-of-the-box testing methods to evaluate the performance of your products, or verify your hypothesis.

We are prepared to build customized test rigs, provide confidential test to examine whether your product meets specific requirement. We can also provide you photo and video footages of the sample being prepared, during test, and the final condition.

* Siigmatic is not claiming ISO17025 compliance for activities outside of the NATA endorsed activities.
Customer specified testing and video footage:
  • Present your test objectives, and we can propose and develop test rigs and test procedures accordingly.
  • Provide detailed video footage of the process with full authority for it to be used by the customer.
  • Provide a test report and the conclusion of the test.

optimisation

✙ Product Design Phase Testing

Product Design Phase Testing

SIIGMATIC can provide hourly basis physical testing or numerical simulation service (i.e parametric modelling or FEA simulation for test) to help customer during their product’s development phase.

When customer provides a description about the real-life use of the product, SIIGMATIC can assist in defining the test objectives, configurating test plans, conducting test or numerical simulation, analysing potential design flaws and\or identifying areas of weakness that could benefit from further design review before your product is released to the market.

SEE OUR Projects »